Clear Care Plus Hydraglyde Contact Lens Solution

The CLEAR CARE PLUS Cleaning & Disinfecting Solution (CLEAR CARE PLUS) system consists of: CLEAR CARE PLUS and the special CLEAR CARE PLUS lens case (the lens case). The lens case consists of a transparent cup (the cup) and a connected unit of screw cap, lens holders (baskets) and the neutralizer catalyst disc attached at the bottom. CLEAR CARE PLUS and the special lens case must always be used together.

Directions: Watch the bubbles go to work! Essential steps for cleaning and disinfection: To ensure proper cleaning and disinfection of your lenses you must follow the instructions completely. Do not skip any steps. Always wash, rinse and dry your hands before handling your lenses. 1. Remove and place each lens into the appropriately marked L/R domed lens holder. Thoroughly rinse with Clear Care* plus for 5 seconds. 2. Fill the Clear Care* plus lens cup to the fill line with Clear Care* plus and place the lens holder in the lens cup. Do not underfill or overfill. 3. Tighten the cap on the Clear Care* plus lens cup and store lenses for at least 6 hours. Do not shake the case. Your lenses are ready to wear after soaking for at least 6 hours. Always use the new lens case provided with each new purchase of Clear Care* plus. Dispose of your old lens case. Always follow your eye care professional's instructions. Please refer to the package insert printed on the inside of this carton for detailed directions and important safety information. Keep Clear Care* plus out of reach of children. Store at room temperature. Once bottle is opened, discard any remaining solution after 3 months of first opening.

Warning: Contraindications (reasons not to use): Do not use if you are allergic to any of the ingredients. For full product use and safety information it is essential to read the enclosed instructions for use. Always follow the enclosed instructions. Only use the provided lens case. Do not use any other lens case. See bottom of carton for lot number and expiration date. Tamper evident: do not use if safety seal around the bottle cap is broken or missing or if the bottle or lens case is damaged. Not for direct use on eye: If non-neutralized Clear Care* plus gets into your eyes it will cause burning and stinging. Remove your contact lenses immediately and flush eyes with a large amount of water or sterile saline. Seek immediate assistance from an eye care professional. Never put non-neutralized Clear Care* plus directly into your eye. Never rinse your contact lenses with Clear Care* plus before you put them in your eyes. If you want to rinse your lenses, use sterile saline. Do not use a flat lens case. Only use Clear Care* plus with the special lens case provided. Do not remove lenses from the lens case for at least 6 hours. The solution needs time to neutralize.