Wet the suction pads thoroughly.
Bend BabyDam in preparation to install in bathtub. Don't worry, BabyDam is created using a unique blend of materials which makes it super tough and able to withstand bending!
Hold BabyDam with your palms facing up and thumbs to the front of the face plate. Line up the BabyDam in the bath above the position where you wish to locate it.
Making sure your BabyDam is square within the bath, push down firmly on the curved handles to flatten the rubber gasket and create an effective seal.
Push down firmly on each suction platform to ensure the pads are stuck to the bottom of the bath.
To ensure rubber gasket lip is completely flat, run your finger around front and rear of the gasket to check perfect seal.
Fill bath to required depth.
Removing BabyDam: After bathing baby, always empty water before releasing suction pads. Release suction pads one by one by pulling each pull tab upwards to break the seal. Without letting go of the pull tab, lift that side of the BabyDam free from the bottom of the bath with your other hand. Then repeat this process to free the other suction pad. Ensure both suction pads are free before removing BabyDam from your bath. NEVER USE ABRASIVES.