Clear Care Cleaning & Disinfecting Solution Triple Action

One step solution for cleaning and disinfecting. Convenient and highly effective system for simultaneous cleaning, daily protein removal, and disinfecting of soft lenses as recommended by your eye care professional.

Never put CLEAR CARE® Cleaning & Disinfecting Solution on your lenses and insert directly into the eye or burning and stinging will result. If spillage occurs, clean up immediately with a paper towel. Wash and rinse your hands before handling your lenses or touching your eyes.

To clean, disinfect, neutralize, and remove protein from your soft contact lenses:

• Remove and place each lens into the appropriately marked L/R domed lens holder.
• Flip open the snap cap on the CLEAR CARE® bottle and bend it back and out of the way.
• Rinse the lenses while on the domed lens holder for 5 seconds.
• Fill the CLEAR CARE® lens case to the fill line with CLEAR CARE® solution and place the lens holder in the case.
• Tighten the cap on the CLEAR CARE® lens case and store lenses for at least 6 hours. DO NOT SHAKE THE CASE.

NOTE: To prevent damage to your lens, center the lens on the dome in the lens holder. Be sure the lens does not touch the basket rim, then close the basket lid. After soaking for six hours, your lenses are ready to wear. No final saline rinse is necessary. Never rinse your lenses with CLEAR CARE® Cleaning & Disinfecting Solution prior to insertion or burning and stinging will result. If desired, lenses can be rinsed with sterile saline before inserting. Discard the used CLEAR CARE® solution from the CLEAR CARE® lens case. Rinse the lens case with sterile saline or CLEAR CARE® solution and allow the case to air dry with the lens holder inverted outside the case. Do not place the lens holder on its side.